HEINDO

 HEINDO waterprrofing and maintenance

• Leaking Roofs                                                         
• Damaged Roofs                                                      
• Sagging Roofs                                                        
• Flat Roofs                                                              
• Ceilings                                                                 
• Flashings                                                               
• Gutters & downpipes                                              
• Fascias                                                                 
• Rotten timber                                                         
• Tile Roofs                                                              
• Zink Roofs                                                             
• Concrete Walls & slabs                                          
•  Showers & Balconies                                            
• Interrior wall painting                                              
• Exterrior wall painting                                            

HEINDO waterproofing and maintenance " Ten Piont System" for waterproofing corrugated iron and ibr roofs

1. 76 x 50mm rotten wood to be replaced
2. Replace all lost or loose screws  with 8mm leak kings
3. Secure all overlaps with pop-rivets
4. Prepare roof surface with hand steel brushes to remove all existing paint
5. Apply one coat electro chemical anti corrosive primer
6. Waterproof all overlaps, screws,side-wall flashings, as well as hips with       -one coat pure acrylic waterproofing emulsion and a polyester  membrane embeddedinto the wet emulsion, aswell as a second layer waterproofing emulsion saturating the membrane.
7. Allow a suitable drying time     
8. Apply a first coat pure acrylic roof coating onto total roof 
9. After a suitable drying time, apply second coat pure acrylic roof coating for a permanent finish
10. Remove all HEINDO rubble and clean site

HEINDO  specification for waterproofing tile,asbestos and slate roofs

1. Clean the surface and prepare
2. Waterproof all overlaps
3. Apply one coat pure acrylic waterproofing emulsion
4. Allow a suitable drying time
5. Apply a first coat pure acrylic roof coating onto waterproofed surface
6. After a suitable drying time, apply a seconda layer coating to ensure perfect finish
7. Remove all HEINDO rubble and clean site 

HEINDO acrylic system for concrete roofs and balconies

1. All surfaces to be  cleaned and prepared
2. Remove all unneccessary material
3. Apply base coat on new concrete - 24h drying time
4. Apply first coat pure acrylic waterproofing
5. A1m polyester membrane embedded into the wet emulsion
6. A second layer waterproofing coat on surface
7. Apply a fisrt coat pure acrylic coating onto waterproofed surface
8. Allow a suitable drying time
9. Apply second coat pure acrylic coating for perfect finish.